工业级WIFI模块串口转以太网 HLK-RM10 无线智能家居控制wifi模块

HLK-RM10是一种新的低成本嵌入式UART-ETH-WIFI模块(串口-网络以太网方式)由深圳Hi-Link电子有限公司有限公司
本产品是嵌入式模块基于通用串行接口的网络标准,内置TCP / IP协议栈,使用户串行端口,以太网、无线网络(wifi)onversions之间的接口。通过HLK-RM10模块,传统的串行设备不需要改变任何配置,数据可以通过互联网传播网络。为用户提供一个**解决方案的串行设备通过以太网传输数据
Pin Assignment 

 

Pin No 
Signal Type 
Description 
1 
3.3VD
Supply Voltage, 3.3V+/-10%
2
GND
Analogue Ground 
3
RXD
UART1 RXD
4
RTS
UART1 RTS
5
TXD
UART1 TXD
6
WPS/RST
WiFi Protected Setup /Restore factory value
7
CTS
UART1 CTS
8
UART_TX
UART0 TXD
9
UART_RX
UART0 RXD
10
LINK1
10/100 PHY Port #1 activity LED
11
RXIP1
10/100 PHY Port #1 RXP 
12
 RXIN1
10/100 PHY Port #1 RXN
13
TXOP1
10/100 PHY Port #1 TXP
14
TXON1
10/100 PHY Port #1 TXN
15
TXON2
10/100 PHY Port #2 TXN
16
TXOP2
10/100 PHY Port #21 TXP
17
RXIP2
10/100 PHY Port #2 RXP
18
RXIN2
10/100 PHY Port #2 RXN
19
I2C_CLK
General GPIO  Reserved
20
I2C_SD
General GPIO  Reserved
21
ES/RST
Exit transparent transmission mode/Restore factory value
22
USB_M
Reserved
23
USB_P
Reserved
24
LINK2
10/100 PHY Port #2 activity LED
25
WLAN_LED
WLAN Activity LED
26
VO1.8
1.8V Output (Suuport Atmost 300mA)
27
GND
Analogue Ground
28
3.3VD
Supply Voltage, 3.3V+/-10%